Automatic Tire Inflator

Set pressures up to 60 psi The same or all 4 different Precision gauges tell you when tires are full Accurate to 1 psi Fills all 4 tires faster than you can fill 2 and you don't have to watch it No danger of overfilling Can also be used to "purge" your tires - letting the air out, then refilling with dried air or nitrogen to remove moisture inside the tire introduced during mounting To set up and use the system: 1.Turn off valve where air line connects. Connect air line - 150 psi MAX. Air line supply should be moisture free 2.Connect hoses to tires. THE FIRST TIME THE FILLER IS USED, BE CERTAIN TO SET THE REGULATORS BELOW 60 psi. Turn the yellow knob counterclockwise to lower the setting. Note they are marked RF, LR, etc. Open valve. 3.Turn yellow knob to set desired tire pressures. They can be the same or all 4 different. Push knob down to lock adjustment. Filling takes 2 - 3 1/2 minutes. Check to see if completed by closing the valve. The 4 gauges act like individual tire gauges. Once correctly adjusted you can let this system run without fear of over filling your tires, freeing you to do something more important.