sell Strain Clamps/Dead-end clamps/tension clamps

Usage: It can be applied to bear strain on nakedness or over-head insulating conductor in transmission & distribution lines. It can connect to pole or tower with matching fittings (such as thimble and socket eyes etc.) It is the substitutes of traditional clamps, such as type-bolt, type-compaction and type-wedge shaped dead-ends clamps. Preformed fittings for dead-ends clamp of steel strand can be applied to terminal immobility of guy wire or ground wire on pole & tower. Component: Inner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc. Feature: 1. Stress is distributed equally, without stress focus. It can protect optical cables very well. 2. Under the condition of not exceeding the intensity of cable's side pressure, it has higher grip power for the cable, and can support higher tensile force. 3.The grip power for the cable is not less than 95% of rating's tensile strength of the optical cable, completely satisfying the needs of setting up the cable. Working conditions: 1. Terminal poles/towers; 2.Poles/towers with corner angles greater than 25 3. Conjoint poles/towers of the optical cables or poles/towers with larger differences in terms of height. Strength: According to the requirement of customers, 30kN, 70kN, 100 KN, 120 KN, etc, can be supplied.