PD132 single vehicle loop detector

PD132 is used for wherever vehicles have to be detectedfor example for monitoring and safe-guarding accessways or for counting vehicles. The output signal can be used for controlling door and gate drive mechanisms, operating barriers, controlling traffic light systems or activating card dispensers in parking lots.

PD132 has two-way output relays. One is unlimited output when loop is permanently coveredwhile the other is multi-mode that can be set by users.

SPECIFICATIONS

Operating voltage AC 220V

Power consumption: <5W

Output relays: AC 240V/5A

Frequency range: 20 kHz to 170 kHz (4 grades adjustable)

Reaction time: 10ms

Signal holding time: Unlimited / limited 10 when minutes loop is permanently covered

Sensitivity: 8 grades (adjustable)

Loop inductance: Ideal 100H to 300H (include connecting wiring)

Max 50H to 1000H (include connecting wiring)

Loop conn. Wiring:max. 100m, twisted at least 20 times per meter, total resistance <10 Ohm

Autocorrecting time: 1s to 2s

Operating temp.:-30 to +75

Storage temp.:-40 to +85

Relative humidity: 95%

Dimensions: 78* 40*108 mm (LWH) (include socket )

Net Weight: 300g include socket