Sell Car Battery Charger

Key Specifications/Special Features:

• General Information
  This series of very small and compact desktop chargers delivers the power one would normally expect of chargers of much bulkier construction. The robust metal housing not only scores with attractive appearance, it's shielding properties are superior over plastic enclosures of devices of a similar kind.
  This battery charger controlled current to boost-charge form small to medium sized Lead acid batteries, up to 150Ah. The 3-step charge characteristic will maintain the battery on top condition, even if left connected over an indefinite period of time. All models come with an attachable metal brackets from simple wall-mountable. Devices range from 110W to 150W power output and they all have a cooling fan.

  Step 1: Constant Current
  The max. permissible constant current (8A-10A), passed into the battery until the voltage reaches a preset level of 14.4V. At the end of this stage, the battery has recovered about 80% capacity, the LED indicator will change from red to yellow.

  Step 2: Timer stage
  The voltage is constant, the charge current falls progressively until a preset length of time has elapsed. As the charge current decayed to a small value, the LED changes state from yellow to green-indicating battery full and the beginning of the maintenance charge.

  Step 3: Maintenance stage (Float stage)
  The voltage is left floating at the level slight less than 13.8V, for long time care of battery.

  Special features

  • Electrical safety standard: EN60335.2.29 and AS/NZ 3350.2.29:2001
  • EMC test: compliant with EN 55014-1/2
  • AC-input cord with plug for EU, UK, US, NZ and Australia or 3-pin IEC connector
  • Output short and reverse polarity protected
  • 2-way screw terminal block output termination
  • Case dimensions (W x H x D): 110 x 50 x 180 (850g)