Sell Steel Coating

D51051 Waterborne Eco-friendly Fe-Ti Steel Structure Anticorrosion Primer Waterborne eco-friendly resin, multi-function additive, high performance pigment, deionized water, etc. * Low VOC, eco-friendly * Excellent paint adhesion and impact resistance * Form compact film, good solvent, water and chemical resistance * Excellent corrosion resistance * Good compatibility with topcoat * Excellent welding and cutting performance * Zn-free, produce no toxic gas during welding and cutting * Excellent permeability, can permeate into the anchor and gap of metal quickly * Better corrosion resistant than solvent-coating Apply to metal surface, such as pipeline, equipment, baluster and steel structure, etc. Iron red, iron black Appearance Smooth, glazed PH Value 8.0±0.5 T－4 Viscosity, S 80±20 Specific Gravity, g/m3 1.37±0.02 Gloss, 60° Matte * Wet film thickness: 40--60μm * Dry film thickness: 25--35μm * Theory dosage: 10--12 m2/L * Surface drying time: ≥0.5h * Hard drying time: ≥24h * Interval time of construction: ≥24h 25℃ RH50% * Construction times: 1-2 times, in accordance with design requirement * Afterward coat: D5101 Waterborne Eco-friendly Multi-function Protection Steel Topcoat. (1-2 times) * Scale steel: Sand blast treat to Sa2.5 * Non-Scale steel: Polish by flexible sand wheel to St2-St3 * Steel coated with plant primer: Second derusting on the damaged and rusted film, polish by flexible sand wheel to St2 or higher * Flame cutting or burning damage place: Polish by flexible sand wheel to St2 or higher; * Repair old film: Root out damaged film, polish by flexible sand wheel to St2-St3; sweep oil and dust in other place. Temperature of substrate must higher than 5℃ Spray coating, dip coating, brush coating. Clear tap water 6 months in dry and cool place between 0-35 ℃ 4L per plastic barrel; 18L per plastic barrel Transport as non-dangerous goods. * Must achieve surface treatment requirement; * In case of coating delamination, chum it up evenly before use; * In case of eye contact, flush immediately with plenty of water, and get medical attention. * Filter the coating by filter screen of 80 mess before use. * This product is waterborne coating, please don’t add organic solvent to dilute or use together with other coatings